CAME VER KIT Instrukcja Użytkownika Pobierz pdf (Strona 48)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

8. Assembling the Gearbox

8.1. Assembling the Gearbox

Each metal pinion gear has a large hole on one side and a small hole on the other (photo 8.5). The motor shaft goes

into the side of the gear with the large hole.

Remove any burrs from the parts that have been cut

from the frames.

Photo 8.3 Photo 8.4

Photo 8.5

Metal pinion gears

Remove the parts shown in photo 8.1 from the

high-speed gearbox box, and use nippers to cut them

apart as shown. Save the frame portions within the

dotted ovals as they will be used later.

ext, prepare the two motors. The motors we will use

have “MCR” printed on them. (Note: We will not be

using the motors contained in the gearbox set.)

Photo 8.4 shows four metal pinion gears, but we will

only use two. The remaining two are spares.

“MCR” indication

Photo 8.1 Photo 8.2

Large Small

The motor shaft goes into the side of

the gear with the large hole.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 91 92

Brak uwag

CAME VER KIT Instrukcja Użytkownika Strona 48